CSC Koulutukset ja tapahtumat ovat muuttaneet

Löydät tulevat koulutukset ja tapahtumat osoitteesta www.csc.fi/asiakaskoulutus.

Tämä sivusto on arkistoversio eikä sitä enää päivitetä
 

Siirry CSC:n koulutuskalenteriin

Sisältö, joissa tagi Vuosi.

2013

11.1.

Seminar in Turku: New CSC computing resources

tammikuuta 2013

The new CSC Kajaani data center was officially inaugurated on 16.10.2012. The new supercluster (named Taito) shall be available for new users early next year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
15.1. - 16.1.

OpenFOAM® Introduction Course at LUT

tammikuuta 2013

OpenFOAM® Introduction Course at Lappeenranta University of Technology

Lue lisää »

Menetelmät ja ohjelmistot
Kurssit ja työpajat
2013
openfoam
16.1.

Seminar in Joensuu: New CSC computing resources

tammikuuta 2013

The new CSC Kajaani data center was officially inaugurated on Tuesday, 16.10.2012. The new supercluster (named Taito) shall be available for new users early next year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
19.1.

Seminar at HY/SpacePhys: New CSC computing resources

tammikuuta 2013

The new CSC Kajaani data center was officially inaugurated on 16.10.2012. The new supercluster (named Taito) shall be available for new users early this year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
22.1.

Seminar in Lappeenranta: New CSC computing resources

tammikuuta 2013

The new CSC Kajaani data center was officially inaugurated on 16.10.2012. The new supercluster (named Taito) shall be available for new users early next year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
22.1. - 23.1.

Iaas in Life Science Research

tammikuuta 2013

Purpose: To collect experience to improve future IaaS service in the life-science community. Results: Practical recommendations for short-term actions for e-Infrastructure to meet the needs of the life-science community. Download report. The event is reserved for invited participants.

Lue lisää »

2013
25.1.

Seminar at Aalto: New CSC computing resources

tammikuuta 2013

The new CSC Kajaani data center was officially inaugurated on Tuesday, 16.10.2012. The new supercluster (named Taito) shall be available for new users early next year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
26.1.

Seminar in Jyväskylä: New CSC computing resources

tammikuuta 2013

The new CSC Kajaani data center was officially inaugurated on Tuesday, 16.10.2012. The new supercluster (named Taito) shall be available for new users early next year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
29.1.

Workshop: Elmer-ohjelmiston kehitys sähkömagnetiikassa

tammikuuta 2013

Elmer on CSC:n johdolla kehitettävä monifysikaalinen elementtimenetelmään perustuva ohjelmisto. Viime aikoina Elmer-ohjelmiston kehitystä ollaan suunnattu erityisesti sähkömagnetiikan ongelmien ratkaisuun. Tässä workshopissa käydään läpi viime aikaista kehistystä ja luodataan tulevia kehityssuuntia.

Lue lisää »

Menetelmät ja ohjelmistot
Kurssit ja työpajat
2013
elmer
30.1.

F-Secure Lisenssisopimuksen tiedotustilaisuus

tammikuuta 2013

Tapahtuma on tarkoitettu korkeakoulujen henkilöstölle, joka on tekemisissä ohjelmistosopimusten hallinnon tai ohjelmistojen teknisen ylläpidon kanssa.

Lue lisää »

2013
31.1.

Seminar at HY/Chem: New CSC computing resources

tammikuuta 2013

The new CSC Kajaani data center was officially inaugurated on Tuesday, 16.10.2012. The new supercluster (named Taito) shall be available for new users early next year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
6.2. - 7.2.

OpenFOAM® Advanced Course

helmikuuta 2013

OpenFOAM Advanced Course by OpenCFD Ltd

Lue lisää »

Menetelmät ja ohjelmistot
Kurssit ja työpajat
2013
openfoam
8.2. - 9.2.

AAPA-Talviseminaari Haaga-Heliassa

helmikuuta 2013

AAPA-Talviseminaari Haaga-Heliassa

Lue lisää »

Seminaarit ja konferenssit
2013
13.2. - 14.2.

Introduction to GPU programming

helmikuuta 2013

This course gives a basic-level introduction to GPGPU programming using CUDA together with MPI in cluster environments. The course starts with a short introduction to the programming model and terminology. Other topics covered include asynchronous data copies between GPUs and host system, synchronization and compiling, linking and executing GPGPU programs together with MPI. The course consists of lectures and hands-on exercises.

Lue lisää »

Ohjelmointi
Kurssit ja työpajat
2013
mpi
14.2.

Korkeakoulujen IAM-tukiryhmä 13.2.2013

helmikuuta 2013

IAM-tukiryhmän kokoontumisessa muunmuassa IAM-hankkeiden esittelyjä Pienryhmien kokoonpano

Lue lisää »

Kurssit ja työpajat
2013
15.2.

Haka-seminaari 14.2.2013

helmikuuta 2013

Haka-seminaari 2013

Lue lisää »

Seminaarit ja konferenssit
2013
27.2. - 2.3.

Cray XC Workshop

helmikuuta 2013

The 3.5 day workshop will give attendees the knowledge required to understand the most optimal way to port, optimize and execute applications on the CSC Cray XC service. The workshop is a mixture of lectures and practical sessions. Example exercises will be provided but attendees are encouraged to bring along their own applications to the workshop. Although specifically targeting the Cray architecture and programming environment much of the lessons learned with be more generally useful.

Lue lisää »

Laskenta-alustat
Kurssit ja työpajat
2013
sisu
2.3.

TotalView Tutorial

maaliskuuta 2013

This workshop is an introduction to debugging parallel software with TotalView, MemoryScape and ReplayEngine.

Lue lisää »

Menetelmät ja ohjelmistot
Laskenta-alustat
Kurssit ja työpajat
2013
sisu
2.3.

Seminar at HIP: New CSC computing resources

maaliskuuta 2013

The new CSC Kajaani data center was officially inaugurated on Tuesday, 16.10.2012. The new supercluster (named Taito) shall be available for new users early this year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
5.3.

Scientific Software Development, part I

maaliskuuta 2013

This workshop series consists of three interactive sessions that address various aspects in development of scientific software. It is targeted for researchers working on writing their own software, participating to a software consortium, or intending to start writing scientific software. The first part addresses the best practices in software engineering.

Lue lisää »

Menetelmät ja ohjelmistot
Kurssit ja työpajat
2013
5.3.

Avoin tiede -keskustelutilaisuus 4.3.2013

maaliskuuta 2013

Tutkimuksen tietoaineistot -hanke järjestää avoimen keskustelutilaisuuden. Tilaisuus on suunnattu pääasiassa tutkijoille ja yliopistojen johdolle, mutta kaikki ovat tervetulleita.

Lue lisää »

2013
6.3. - 9.3.

CSC Winter School in Bioinformatics 2013

maaliskuuta 2013

This course provides a tutorial-style introduction to the essential, practical computational tools for life science research, with a focus on the infrastructure provided by CSC. The topics will include, e.g., managing your datasets, running analyses on a grid or a computer cluster, Unix power use, and basics of R programming. The workshop is a must for graduate students in the field, providing a comprehensive overview on the tools of the trade, without forgetting the important aspect of network building.

Lue lisää »

Ohjelmointi
Kurssit ja työpajat
2013
r
12.3.

Seminar in Kuopio: New CSC computing resources

maaliskuuta 2013

The new CSC Kajaani data center was officially inaugurated on Tuesday, 16.10.2012. The new supercluster (named Taito) shall be available for new users early this year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
12.3.

OKM:n bibliometriikkaseminaari korkeakouluille

maaliskuuta 2013

Opetus- ja kulttuuriministeriö järjestää korkeakouluille bibliometriikkaseminaarin maanantaina 11.3.2013 klo 12–16.

Lue lisää »

Seminaarit ja konferenssit
2013
14.3. - 15.3.

GN3 Wireless Workshop - The Next Wave

maaliskuuta 2013

LTE networks and the new ac standard is at our doorstep and eduroam is spreading wildly and it's getting more and more mature. Is everything in order in the wireless networks? Where should we focus our attention next?

Lue lisää »

Kurssit ja työpajat
2013
15.3.

IPv6-perusteet

maaliskuuta 2013

Katsaus IPv6-protokollan käyttöön ja konfigurointiin. Kurssi on tarkoitettu vain Funet-jäsenorganisaatioiden henkilökunnalle.

Lue lisää »

Kurssit ja työpajat
Tietoliikenne
2013
funet
20.3.

TTA-seminaari; metatietomallit ja kokonaisarkkitehtuuri

maaliskuuta 2013

Tutkimuksen tietoaineistot -hanke järjestää avoimen keskustelutilaisuuden. Tilaisuus on suunnattu pääasiassa metatietomallien ja kokonaisarkkitehtuurin kanssa tekemisissä oleville henkilöille, mutta kaikki ovat tervetulleita.

Lue lisää »

2013
20.3. - 23.3.

Spring School in Computational Chemistry

maaliskuuta 2013

This course provides a comprehensive, tutorial-style, hands-on, introductory and intermediate-level treatment of all the essential ingredients for molecular modeling and computational chemistry using modern supercomputers. Standard approaches such as classical and ab initio molecular dynamics, electronic structure models as well as several more special topics are explained and exemplified by prominent researchers in the field. The workshop is a must for graduate students in the field, providing an overview on "what can be calculated and how should it be done", without forgetting the important aspect of network building.

Lue lisää »

Menetelmät ja ohjelmistot
Kurssit ja työpajat
2013
chemistry
20.3. - 23.3.

PRACE Winter School on Scientific Visualisation 2013, Dublin, Ireland

maaliskuuta 2013

The PRACE Winter School on Scientific Visualiation 2013 is a 3 day course aimed at scientists who wish to learn the fundamentals of several tools and techniques that are commonly used to generate visualisation of scientific research. The event will be a mix of talks and hands-on sessions conducted in English.

Lue lisää »

Kurssit ja työpajat
2013
26.3. - 28.3.

Parallel Programming with MPI

maaliskuuta 2013

This course is a walk-through on the most important features of the de-facto standard approach to parallel programming: Message Passing Interface (MPI).

Lue lisää »

Ohjelmointi
Kurssit ja työpajat
2013
mpi
27.3.

Tietovarastofoorumi IV

maaliskuuta 2013

Tietovarastofoorumin tapaaminen 2013/1

Lue lisää »

Data ja sen tallennus
Kurssit ja työpajat
2013
4.4.

Elmer FEM basic course

huhtikuuta 2013

Elmer FEM Basic course teaches the basic use of Elmer finite element software suite. Elmer is one of the most popular multiphysical simulation software published under open source. The course is intended for persons with no or little prior knowledge of Elmer but some background on the solution of partial differential equations.

Lue lisää »

Menetelmät ja ohjelmistot
Kurssit ja työpajat
2013
elmer
5.4.

Elmer FEM programming workshop

huhtikuuta 2013

Elmer FEM programming workshop provides the opportinity to dwell into the coding of Elmer with the guidance of Elmer developers. Elmer is one of the most popular multiphysical simulation software published under open source. The course is intended for who have at least a little background in finite element and Fortran programming.

Lue lisää »

Menetelmät ja ohjelmistot
Kurssit ja työpajat
2013
elmer
9.4. - 9.3.

Scientific Software Development, part II

huhtikuuta 2013

This workshop series consists of three interactive sessions that address various aspects in development of scientific software. It is targeted for researchers working on writing their own software, participating to a software consortium, or intending to start writing scientific software. The second part addresses productization considerations.

Lue lisää »

Menetelmät ja ohjelmistot
Suurteholaskenta
Kurssit ja työpajat
2013
10.4. - 12.4.

MATLAB Fundamentals

huhtikuuta 2013

This three-day course provides a comprehensive introduction to the MATLAB® technical computing environment. The course is intended for beginning users and those looking for a review. No prior programming experience or knowledge of MATLAB is assumed. Themes of data analysis, visualization, modeling, and programming are explored throughout the course.

Lue lisää »

Menetelmät ja ohjelmistot
Ohjelmointi
Kurssit ja työpajat
2013
matlab
11.4.

TTA-seminaari; pitkäaikaissäilytyksen keskustelutilaisuus

huhtikuuta 2013

Keskustelutilaisuudessa esitellään Tutkimuksen tietoaineistot – hankkeessa (TTA) toteutettavaa tutkimuksen pitkäaikaissäilytyspalvelua ja perehdytetään kuulijat pitkäaikaissäilytyksen (PAS) periaatteisiin ja teemoihin.

Lue lisää »

Seminaarit ja konferenssit
Data ja sen tallennus
2013
11.4.

TTA-seminaari; Kerro meille datastasi -työpaja

huhtikuuta 2013

Työpajan tarkoituksena on luoda katselmus eri tutkimusalojen datan hallinnan nykytilaan, aineistojen luonteeseen ja määrään sekä tulevaisuuden tallennus- ja pitkäaikaissäilytystarpeisiin.

Lue lisää »

Seminaarit ja konferenssit
2013
Data ja sen tallennus
11.4. - 13.4.

TRANSITS I -kurssi

huhtikuuta 2013

TRANSITS on alunperin EU-rahoituksella ja TERENA:n varjon alla toteutettu koulutusohjelma, jonka koulutusmateriaalia Funet CERT saa käyttää kurssillaan. Kurssi on suunnattu olemassa olevien tietoturvatiimien uusille aloitteleville jäsenille sekä asiakkaille, joilla ei välttämättä ole nimettyä ns. incident response -tiimiä. Kurssille valitaan mukaan 12 henkilöä ilmoittautuneista.

Lue lisää »

Kurssit ja työpajat
Tietoturva
2013
12.4.

Seminar at HY/Mathematics: New CSC computing resources

huhtikuuta 2013

The new CSC Kajaani data center was officially inaugurated on Tuesday, 16.10.2012. The new supercluster (named Taito) shall be available for new users early this year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
13.4.

MATLAB for Data Processing and Visualization

huhtikuuta 2013

This one-day course focuses on the details of data management and visualization techniques, from reading arbitrarily formatted text data files to producing customized publication-quality graphics. The course emphasizes creating scripts that extend the basic features provided by MATLAB.

Lue lisää »

Menetelmät ja ohjelmistot
Ohjelmointi
Kurssit ja työpajat
2013
matlab
16.4. - 17.4.

OpenFOAM® Introduction Course at TUT

huhtikuuta 2013

OpenFOAM introduction course at Tampere University of Technology

Lue lisää »

Menetelmät ja ohjelmistot
Kurssit ja työpajat
2013
openfoam
17.4. - 19.4.

Python in High-Performance Computing

huhtikuuta 2013

Python is a modern, object-oriented programming language, which has become popular in several areas of software development. This course introduces the basic concepts of the Python programming language and how it can be used effectively in high-performance computing.

Lue lisää »

Menetelmät ja ohjelmistot
Ohjelmointi
Kurssit ja työpajat
2013
python
18.4. - 20.4.

Taito cluster workshop II

huhtikuuta 2013

The new cluster system Taito will be available for users during spring 2013. In this workshop the attendees will learn the best practices on porting and optimizing their applications onto the system.

Lue lisää »

Kurssit ja työpajat
Laskenta-alustat
2013
taito
20.4.

Seminar at Aalto/COMP: New CSC computing resources

huhtikuuta 2013

The new CSC Kajaani data center was officially inaugurated on Tuesday, 16.10.2012. The new supercluster (named Taito) shall be available for new users early this year, the new supercomputer (Sisu) in spring 2013.

Lue lisää »

Seminaarit ja konferenssit
Laskenta-alustat
2013
taito sisu
24.4. - 26.4.

Scientific Visualization

huhtikuuta 2013

Scientific visualization, sometimes referred to as visual data analysis, uses the graphical representation of data as a means of gaining understanding and insight into the data. It is more and more important in scientific research of today, since datasets are growing at an extremely rapid pace.

Lue lisää »

Menetelmät ja ohjelmistot
Data ja sen tallennus
Kurssit ja työpajat
2013
24.4. - 27.4.

PRACE Spring School, 2013 - New and Emerging Technologies - Programming for Accelerators, Umeå, Sweden

huhtikuuta 2013

The Partnership for Advanced Computing in Europe (PRACE) is pleased to announce the Spring School on New and Emerging Technologies - Programming for Accelerators. The Spring School is organized by SNIC and hosted by High Performance Computing Center North (HPC2N) in Umeå;, Sweden. Expert presenters from PRACE Advanced Training Centers (PATCs) and vendors will combine lectures and hands-on sessions to provide an introduction to accelerator programming.

Lue lisää »

Ohjelmointi
Kurssit ja työpajat
2013
30.4.

Scientific Software Development, part III

huhtikuuta 2013

This workshop series consists of three interactive sessions that address various aspects in development of scientific software. It is targeted for researchers working on writing their own software, participating to a software consortium, or intending to start writing scientific software. The third part addresses hardware and platform considerations.

Lue lisää »

Menetelmät ja ohjelmistot
Kurssit ja työpajat
2013
7.5. - 8.5.

Siirtokelpoisten tiedostomuotojen migraatiot (työpajat)

toukokuuta 2013

Siirtokelpoiset tiedostomuodot ovat muotoja, joita pitkäaikaissäilytysratkaisu ottaa vastaan, mutta jotka siirron ja tarkastuksen jälkeen migroidaan säilytyskelpoisiin tiedostomuotoihin. Työpajoissa keskitytään näihin migraatioihin, havainnoidaan migraatioiden vaikutuksia aineistojen eri ominaisuuksiin ja pohditaan näiden merkitystä sisällön ymmärrettävyyteen. Työpaja on suunnattu erityisesti tiedostomuotokysymysten kanssa työskenteleville.

Lue lisää »

Kurssit ja työpajat
2013
7.5.

KDK-pitkäaikaissäilytys 2013 -seminaari

toukokuuta 2013

KDK-pitkäaikaissäilytys 2013 -seminaari keskittyy digitaalisen pitkäaikaissäilyttämisen (PAS) haasteisiin ja etenemiseen. Seminaarissa käydään läpi kulttuuriaineistojen säilyttämisen haasteita eri näkökulmista, kuinka KDK:n PAS-ratkaisun toteuttaminen etenee sekä kuullaan organisaatioiden kokemuksia esimerkiksi aineistojen paketoinnin piloteista. Seminaarin yhteydessä pidetään myös työpajoja.

Lue lisää »

Data ja sen tallennus
Kurssit ja työpajat
2013
8.5. - 9.5.

Funetin tekniset päivät / vuosikokous 2013

toukokuuta 2013

Funetin tekniset päivät on vuosittainen sidosryhmätapahtuma, jossa käsitellään ajankohtaisia verkkoteknisiä kysymyksiä.

Lue lisää »

Kurssit ja työpajat
2013
— 50 Merkintöjä per sivu
Näytetään tulokset 1 - 50 / 100